Posted 11 May 2010 - 06:23 PM
The application reads a configuration file from which it takes the value for the attenuation of the sound and then plays it.
The problem is that when the sound is playing and i try to control the volume using windows volume control panel, in some point of the master volume (near the middle point) control, the sound dissapear and you can´t hear anything. Above this point the sound is very loud so i can't get a reasonable volume.
Many thanks in advance.
Posted 11 May 2010 - 11:11 PM
I mean, what happens if you just play the sound without changing any default parameter at all, does it play correctly?
Posted 12 May 2010 - 02:23 PM
If i set 0 attenuation from the configuration file the problem persist.
The difference is that the position of the master volume for which the sound dissapears change according to the attenuation applied.
For example, with 0 attenuation the sound dissapear at the middle point of the master volume. With a 1000 value for the attenuation the sound dissapear at 3/4 of the master volume (attenuation and position are only for reference, not real values)
Posted 12 May 2010 - 03:22 PM
At this point I suspect the attenuation is the cause of your problem.
Posted 12 May 2010 - 03:47 PM
I know that is very hard to get a conclusion this way but i was hoping to find someone else who have had a similar problem.
Posted 12 May 2010 - 05:54 PM
Posted 12 May 2010 - 07:30 PM
Posted 12 May 2010 - 07:36 PM
Posted 13 May 2010 - 07:05 AM
You have to first of all checked that sound icons was apply it.If sound icon was applied than you was faced that issue.So first you have go on properties, there you will find drop down box in there You will need to select show sound icons.So you can easily control on it.I hope that it would be help for it
Posted 25 August 2010 - 08:43 PM
New Demos: Astronauts and Funk Music - Knights and Film Music
Music Composers love blondes! Why? Find here: Marino Sounds Studio
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users